Removing and installing operating and display unit, air conditioning system
with electric/manual controls and Climatronic
Special tools and workshop equipment
required
Removal wedge -3409-
Note
If a new Climatronic control unit -J255- or air conditioning
system control unit ...
Identification
Gearbox identification
The following information is indicated on the gearbox (example):
KHN = Gearbox code
01.06.06 = Production date
14 = Factory code
13:59 = Production time
0026 = Serial number
...
Removing and installing washer jets
Removing
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
–
Remove pop-up cylinder
→  ...