Volkswagen Golf Service & Repair Manual: Front heater and air conditioning unit
- Assembly overview - heater and air conditioning unit, Climatronic
- Assembly overview - add-on parts of heater and air conditioning unit and of air intake box
- Assembly overview - evaporator housing
- Assembly overview - flaps and partitions in air distribution housing
- Removing and installing heater and air conditioning unit
- Dismantling and assembling heater and air conditioning unit
- Removing and installing air distribution housing
- Removing and installing holder for heater and air conditioning unit
- Removing and installing evaporator
- Removing and installing fresh air blower control unit -J126-, LHD vehicles
- Removing and installing fresh air blower control unit -J126-, RHD vehicles
- Removing and installing dust and pollen filter, LHD vehicles
- Removing and installing dust and pollen filter, RHD vehicles
- Removing and installing fresh air blower -V2-, LHD vehicles
- Removing and installing fresh air blower - V2-, RHD vehicles
- Checking auxiliary air heater element -Z35- with auxiliary air heater control unit -J604-, LHD vehicles
- Checking auxiliary air heater element - Z35- with auxiliary air heater control unit - J604-, RHD vehicles
- Removing and installing auxiliary air heater element -Z35- with auxiliary air heater control unit -J604-, LHD vehicles
- Removing and installing auxiliary air heater element - Z35- with auxiliary air heater control unit - J604-, RHD vehicles
- Removing and installing Valeo heat exchanger, LHD vehicles
- Removing and installing Valeo heat exchanger, RHD vehicles
- Removing and installing Denso heat exchanger, LHD vehicles
- Removing and installing Denso heat exchanger, RHD vehicles
- Removing and installing coolant pipes at heat exchanger (Valeo)
- Removing and installing coolant pipes at heat exchanger (Denso)
- Removing and installing evaporator temperature sensor -G308-, LHD vehicles
- Removing and installing evaporator temperature sensor -G308-, RHD vehicles
- Checking condensation drainage
- Removing and installing condensation drainage (LHD)
- Removing and installing condensation drain (RHD)
- Removing and installing baffle plate, LHD vehicles
- Removing and installing baffle plate, RHD vehicles
Removing and installing front air distribution flap actuation unit,
Climatronic, RHD vehicles
Removing
–
Remove dash panel central tube
→ General body repairs, interior; Rep. gr.70.
– ...
Assembly overview - heater and air conditioning unit, Climatronic
Note
There are different designs and makes of heater and air
conditioning unit. The individual components of the various
heaters and air conditio ...
Other materials:
Cross section of a radial belted tyre
1 -
Tread block
2 -
Tread groove
3 -
Tread
4 -
Nylon ply
5 -
Belt layers
Usually made of steel
6 -
Bead core
...
Removing and installing sliding sunroof frame
Special tools and workshop equipment
required
Double cartridge gun -VAS 5237-
Electric cutter -V.A.G 1561A-
...
Overview of fitting locations - front control motors, Climatronic, LHD
vehicles
In vehicles with start-stop system, note abort conditions:
→ Chapter
1 -
Left temperature flap control motor -V158-
With potentiometer for left temperature flap control motor -G ...
