VW Golf manuals

Volkswagen Golf Service & Repair Manual: Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

Volkswagen Golf Service & Repair Manual / Running gear, axles, steering / Rear suspension, drive shaft / Subframe / Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

Special tools and workshop equipment required
   
Locating pins -T10096-
 

Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

Engine and gearbox jack -V.A.G 1383 A-
Installing locating pins -T10096-
 

Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

–  Position engine and gearbox jack -V.A.G 1383 A- with universal gearbox mounting -V.A.G 1359/2--1- under subframe and secure with tensioning strap.
 

Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

–  Unscrew bolt -1- on both sides.
To fix position of subframe, locating pins -T10096- must be screwed in successively at positions -2- and -3- on both sides of vehicle.
 

Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

–  Remove one of the front bolts of the subframe -arrow-
 

Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

–  Screw in locating pins -T10096--1-.
  Note
The locating pins -T10096- may be tightened only to a maximum of 20 Nm; otherwise the threads of the locating pins may be damaged.
–  This procedure must now be carried out for the second front bolt and the rear bolts of the subframe.
The position of the subframe is now fixed.
 

Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE

Assembly overview - subframe, multi-link suspension, four-wheel drive
1 -  Subframe Removing and installing subframe with attachments → Chapter. 2 -  Rear bonded rubber bush ...

Fixing position of subframe, multi-link suspension, front-wheel drive, Golf GTE
Special tools and workshop equipment required     Locating pins -T10096-   ...

Other materials:

Spare wheel or temporary spare wheel
Fig. 203 In the luggage compartment: handwheel for securing the spare wheel First read and observe the introductory information and safety warnings Removing the spare wheel Open the tailgate and lift up the luggage compartment floor until it is held in position by the side restraints ...

Drink holders in the front centre console
Fig. 118 In the lower part of the centre console: opening the drink holder Fig. 119 In the lower part of the centre console: closing the front drink holder First read and observe the introductory information and safety warnings There are various versions of the drink holder in the fron ...

Assembly overview - rear belt buckle
1 -  Left double belt buckle With rear belt switch, driver side -E258- Removing and installing → Chapter Always renew after belt tensioner has deployed with seat belt fastened Press on belt buckle when bolting it on Must rest flat against cont ...

© 2016-2024 Copyright www.vwgolf.org