First read and observe the introductory information and safety warnings
The maximum permitted load on a bicycle carrier mounted on the ball coupling is 80 kg at a distance of 300 mm. This distance refers to the gap between the centre of gravity of the bicycle carrier (complete with bicycles) and the middle of the ball coupling.
WARNING
Incorrect use of the towing bracket with a bicycle carrier fitted to the ball coupling could cause injuries and accidents.NOTICE
Considerable vehicle damage could occur if the maximum permitted payload or distance is exceeded.Removing and installing fuel pressure sender -G247-
Special tools and workshop equipment
required
Assembly tool -T10118-
Socket, 27 mm -T40218- or commercially available 27 mm ...
Removing and installing tensioner for poly V-belt, vehicles without air
conditioner compressor
Removing
–
Remove poly V-belt from tensioner
→ Chapter „Removing and installing poly V-belt, vehicles without
air conditioner compressor“.
–
...
Dimensions – lettering on rear lid, “R-Line”
Note
When fitting the lettering, observe the fitting notes
→ Anchor.
1 -
Lettering
Model designation
2 -
Height dimension
73 ± 1 mm, from upper edge of lettering to tail light.
...