VW Golf manuals

Volkswagen Golf Service & Repair Manual: Extraction and charging valve, high-pressure side

  Note
Torque wrench -V.A.G 1783- with 1/4" ratchet adapter -VAS 6234-
Appropriate insert -T10364- to remove valve core → Fig.
1 -  Base with external or internal thread
2 -  O-ring: 10.8 mm; 1.8 mm identification: black or coloured
3 -  Valve with M12 x 1.5 mm external thread and groove for O-ring (7 ± 1 Nm)
4 -  O-ring for cap, 10.8 mm; 1.8 mm identification: black or coloured
5 -  Cap
 

Extraction and charging valve, high-pressure side

Evacuation and charging valve with Schrader valve
  Note Torque wrench -V.A.G 1783- with 1/4" ratchet adapter -VAS 6234- Appropriate insert -T10364- to remove Schrader valve ...

Extraction and charging valve, low-pressure side
  Note Torque wrench -V.A.G 1783- with 1/4" ratchet adapter -VAS 6234- Appropriate insert -T10364- to remove valve core ...

Other materials:

Overview of fitting locations - seat belts and anchorage points, estate
1 -  Front belt buckles Assembly overview → Chapter Removing and installing → Chapter 2 -  Front belt end anchor Assembly overview → Chapter Removing and installing → Chapte ...

Removing and installing TV tuner, Golf
Special tools and workshop equipment required     Protective cap for wiring harness connector -VAS 6223/9- If the control unit is replaced, select the Replace function of the resp ...

Removing and installing knock sensor 1 -G61
Removing –  Remove air conditioner compressor from bracket and tie up → Heating, air conditioning; Rep. gr.87.     –  Disconnect electrical connector ...

© 2016-2024 Copyright www.vwgolf.org