VW Golf manuals

Volkswagen Golf Service & Repair Manual: Evaporator output temperature sender -G263- or evaporator temperature sensor -G308

Function:
The evaporator output temperature sender -G263- or evaporator temperature sensor -G308- reads the temperature downstream from the evaporator. This value is transmitted to the air conditioning system control unit and serves as a reference signal for regulating the air conditioner compressor. This prevents icing of the evaporator.
 

Evaporator output temperature sender -G263- or evaporator temperature sensor -G308

Temperature switch for evaporator -E33
Function: The temperature switch for evaporator -E33- senses the temperature between the cooling fins of the evaporator. It prevents the possib ...

Pressures and temperatures in the refrigerant circuit
  WARNING When working on the refrigerant circuit, observe generally applicable safety rules and the Regulations for ...

Other materials:

Renewing bonded rubber bush
Special tools and workshop equipment required Tensioning strap -T10038- Assembly tool -T10263- Assembly tool -T10356- Engine and gearbox jack -V.A.G 1383 A- Hydraulic press -VAS 6178- and thrust piece - ...

Removing and installing mirror adjustment unit
      Special tools and workshop equipment required         Torque wrench -V.A.G 1783-   Note The removal and installat ...

Removing and installing D-pillar trim
  Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate. Special tools and workshop equipment required     ...

© 2016-2024 Copyright www.vwgolf.org