VW Golf manuals

Volkswagen Golf Service & Repair Manual: Evacuation and charging valve with Schrader valve

  Note
Torque wrench -V.A.G 1783- with 1/4" ratchet adapter -VAS 6234-
Appropriate insert -T10364- to remove Schrader valve core → Fig.
A -  Service port (soldered in)
B -  Valve core (2.4 ± 0.2 Nm)
C -  O-ring (for the valve)
D -  Sealing cap with seal
 

Evacuation and charging valve with Schrader valve

Evacuation and charging valves for quick-release couplings of air conditioner service station on refrigerant circuit
Special tools and workshop equipment required Torque wrench -V.A.G 1783- (2…10 Nm) with 1/4" ratchet adapter -VAS 6234- ...

Extraction and charging valve, high-pressure side
  Note Torque wrench -V.A.G 1783- with 1/4" ratchet adapter -VAS 6234- Appropriate insert -T10364- to remove valve core ...

Other materials:

Removing and installing seat trim on sill side, electrically adjustable seat
  Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate. Special tools and workshop equipment required     ...

Removing and installing holder for heater and air conditioning unit
  Note Leave the holders in the vehicle on removing the heater and air conditioning unit. The illustration shows a left-hand drive vehicle.     Removing –  Re ...

Overview - drive shaft
I -  → Chapter „Assembly overview - drive shaft, constant velocity joint VL100“ II -  → Chapter „Assembly overview - drive shaft, constant velocity joint VL107“ III -  → Cha ...

© 2016-2024 Copyright www.vwgolf.org