Volkswagen Golf Service & Repair Manual: Equipment
- Assembly overview- net partition
- Assembly overview - sun visors
- Assembly overview - roof grab handle
- Removing and installing net partition
- Removing and installing net partition mounting
- Removing and installing bracket for net partition
- Removing and installing eyelet for net partition
- Removing and installing sun visor
- Removing and installing sun visor centre mount
- Removing and installing bracket for roof grab handle
Removing and installing storage compartment in roof headliner
Removing
–
Switch off ignition.
–
Unclip cover -1- from storage
compartment in roof headliner -3-. ...
Assembly overview- net partition
1 -
Net partition
Removing and installing
→ Chapter
2 -
Bolt
4.5 Nm
3 -
Remove fitting e ...
Other materials:
Removing and installing fresh air blower - V2-, RHD vehicles
Note
If only the fresh air blower -V2- is defective, remove and
install fresh air blower control unit -J126-
→ Chapter.
Removing
–
Remove baffle plate
→ Chapter.
...
Removing and installing camshaft control valve 1 -N205- and exhaust camshaft
control valve 1 -N318-
Note
On engines with codes CMBA, CPVA, CXSA, CZCA and CPVB, only
camshaft control valve 1 -N205- is installed.
Removing
Inlet camshaft control valve 1 -N205-
–
Disconnect ele ...
Retrofitting two-way radios
First read and observe the introductory information
and safety warnings You will need an external aerial to use a two-way radio
in the vehicle.
Any retrofit installation of electrical or electronic equipment in the vehicle
will affect its vehicle type approval. Under certain circumstances, ...
