Assembly overview - subframe
1 -
Anti-roll bar with rubber bush
Removing and installing
→ Chapter
2 -
Nut
When tightening, counterhold on multipoint socket of joint stub.
Renew after removing
...
Removing and installing rear fog light bulb -L46-/-L47-
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
Removing
–
Turn light switch to “0” position.
...
Assembly overview - brake pedal, RHD vehicles
Note
The handbrake pedal travel must not be restricted by additional
floor coverings.
Do not lubricate or grease the pivot pin. The pivot pin must remain
dry.
1 -
Bolt
20 Nm
2 -
...