Volkswagen Golf Service & Repair Manual: Electrical components not installed in refrigerant circuit
- Control and regulating unit for air conditioning system -J127
- Radiator fan control unit -J293
- Radiator fan control unit -J293
- Temperature switch for evaporator -E33
- Evaporator output temperature sender -G263- or evaporator temperature sensor -G308
- Pressures and temperatures in the refrigerant circuit
- Refrigerant circuit with expansion valve
- Refrigerant circuit with restrictor and reservoir
Air conditioner compressor regulating valve -N280
The regulating valve is fitted to the air conditioner
compressor. It is activated by the operating and display unit
for Climatronic air conditioning system -E87- or t ...
Control and regulating unit for air conditioning system -J127
This control and regulating unit switches off the
refrigerant flow through the second evaporator if the
temperature at the cooling fins of the second evaporator falls ...
Other materials:
Removing and installing drive shafts, triple roller joint AAR3300i bolted
Special tools and workshop equipment
required
Torque wrench -V.A.G 1332-
Press tool -T10520-
...
Saw-tooth wear
Saw-tooth wear is a stepped wear pattern on the individual
tread blocks → Fig.
that can cause increased tyre noise. The saw tooth is caused by
uneven deformation of the tread blocks in the tyre's contact
patch. Saw-tooth wear is more pronounce ...
Assembly overview - cylinder block, gearbox end
Note
For assembly work, secure engine to engine and gearbox support
→ Chapter.
1 -
Bolt
Renew
60 Nm + 90°
2 -
Flywheel
Removing and installin ...
