Volkswagen Golf Service & Repair Manual: Electrical components

Volkswagen Golf Service & Repair Manual / Running gear, axles, steering / Technical data / Evaluating accident vehicles / Electrical components

some point, you have probably received an electric shock when touching a metal object. This is due to the electrostatic charge accumulated by the human body. This charge can cause malfunctions if you touch the electric steering rack and steering column components.

–	Before working on electrical components, touch an earned object, such as a water pipe or a lifting platform. Do not directly touch connector contacts.

Electrical components

Nuts and bolts

Loosen and tighten bolts and securing nuts for covers and housings diagonally. Avoid canting particularly sensitive parts such as comtrol ...

Raising wheel bearing assembly to unladen position (vehicles with coil springs), front axle

Special tools and workshop equipment required Engine and gearbox jack -V.A.G 1383 A- Tensioning strap -T10038- Support -T10149- ...

Other materials:

Removing and installing front passenger side footwell cover
Removing – Remove bolts -1-. – Release front passenger side footwell cover -2- from dash panel and centre console and remove it. Installing Note ...

Assembly overview - control unit and hydraulic unit, RHD vehicles
1 - Brake line From secondary piston circuit of brake master cylinder to hydraulic unit. Identification: 6 mm in diameter and union nut with thread M 12 x 1 Repairing brake lines → Chapter ...

Removing and installing B-pillar trim on front door
Note Removal and installation are described only for the left side. Removal and installation of the right side are similar. Removing – Run door window down to bottom position. – Pull window channel -3- in area ...