Fig. 178 In the instrument cluster display: examples of recognised speed limits or overtaking restrictions with accompanying additional signs
First read and observe the introductory information and safety warningsTraffic sign recognition texts | Cause and solution |
---|---|
No traffic signs detected | The system is in the initialisation phase. OR: the camera has not detected any regulatory or warning signs. |
Error: traffic sign recognition | System fault. Go to a qualified workshop and have the system checked. |
Traffic sign recognition: clean the windscreen! | The area of the windscreen in the vicinity of the camera is dirty. Clean the windscreen. |
Traffic sign recognition: currently restricted. | No data transmission from the navigation unit. Check if valid map data is loaded on the navigation unit. OR: the vehicle is located in an area that is not covered by the map stored on the navigation unit. |
No data available | Traffic sign recognition is not supported in the country in which you are currently travelling. |
WARNING
Failure to observe the text messages can lead to your vehicle breaking down in traffic, and can cause accidents and serious injuries.NOTICE
Failure to observe illuminated indicator lamps and text messages can lead to your vehicle being damaged.Assembly overview - valves
1 -
Inlet valve
Do not rework. Only lapping in is permitted.
Valve dimensions
→ Chapter
Checking valve guides
→ Chapter.
2 -
Exhaust valve
Do not re ...
Assembly overview - bonnet
1 -
Bonnet
Removing and installing
→ Chapter
Adjusting
→ Chapter
2 -
Adjustment buffer
Qty. 2
3 -
Insulation
Removing and installing
→ Chapter
...
Notes on tow-starting
First read and observe the introductory information
and safety warningsVehicles should not be tow-started wherever possible.
Use jump leads to start the engine instead .
For technical reasons, the following vehicles cannot be tow-started:
Vehicles with an automatic gearbox.
Vehicle ...