Volkswagen Golf Service & Repair Manual: Dimensions – lettering on wing
Note
| The dimensions shown here for “GTI” as an example are valid for all emblems. |
| 1 - | Emblem |
- Variations in appearance possible depending on the (special) model.
| 2 - | Height dimension |
- 5.0 ± 1 mm, from upper edge of lettering to edge of wing
| 3 - | Horizontal dimension |
- 1.5 ± 1 mm, from outer edge of wing to lettering
Dimensions – lettering on rear lid, “R-Line”
Note
When fitting the lettering, observe the fitting notes
→ Anchor.
1 -
Lettering
Model designation
2 -
...
Dimensions – lettering on wing, “R”
1 -
Emblem
2 -
Height dimension
5.0 ± 1 mm, from upper edge of lettering to edge of wing
3 -
Horizontal dim ...
Other materials:
Removing automatic distance control unit from and installing on retaining
plate, variant 2
Note
If the automatic distance control unit -J428- is renewed,
start the respective function → Vehicle
diagnostic tester.
Special tools and workshop equipment
required
...
Assembly overview - rear brake caliper
When carrying out repairs, install all parts supplied in
repair kit.
Use only methylated spirits for cleaning the brake.
New brake calipers are filled with brake fluid and are
pre-bled.
...
Assembly overview - wheel, PAX
1 -
Wheel
Fitting wheels
→ Chapter
2 -
Wheel bolts
Different versions
→ Chapter
3 -
PAX tyre
Identification markings on the tyre sidewall ...
