Removing and installing side defroster vent
Assembly overview - dash panel central tubeRemoving and installing starter, vehicles with double clutch gearbox
(DQ200–7F)
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Torque wrench -V.A.G 1332-
Remov ...
Assembly overview - FS III front brake
Note
After every brake pad change, depress brake pedal firmly several
times with vehicle stationary, so that brake pads are properly seated in
their normal operating position.
Use the brake filling and bleeding equipment -VAS 5234- to draw off
brake ...
Working on airbag system
WARNING
When work is performed on the airbag system
(pyrotechnical components, airbag control unit -J234-,
wiring) the battery earth strap must be disconnected
when the ignition is switched on.
...