Volkswagen Golf Service & Repair Manual: Cross section of a radial belted tyre
| Consists of steel wires vulcanised into rubber. |
| Ensures secure seating of the tyre on the rim. |
| 8 - |
Rim flange protection |
| Protects the rim and tyre from abrasion from, for example, contact
with the kerb |
| Tyres with Maximum Flange Shield (or rim protector bar) are marked
with the abbreviation MFS. |
| The nylon ply -4-, belt layers
-5-, bead cores
-6- and bead filler
-7- form the carcass. The carcass
is the “load-bearing structure” of the tyre. |
|
Removing and fitting run-flat tyres
→ Chapter.
If run-flat tyres are used, a Tyre Pressure Monitor display
must be fitted.
...
Other materials:
Connecting brake pedal to brake servo
Hold ball head of plunger rod in front of mounting and push
brake pedal in direction of brake servo, so that the ball head
clicks into place.
–
Check engagement by pulling briefly on brake pedal.
...
Routing and securing wiring
Mark lines prior to removal to prevent them from being
interchanged and to ensure that they are fitted in their
original positions. This applies for fuel, hydraulic and vacuum
lines as well as lines for activated charcoal filter system and
electrical wir ...
Assembly overview - storage compartment in roof headliner
1 -
Storage compartment
Removing and installing
→ Chapter
2 -
Cover
3 -
Bolt
Qty. 4
1.5 Nm
4 -
Front interior light -WX1-
Overview of fitting location ...
© 2016-2024 Copyright www.vwgolf.org
Run-flat tyres, structure and identification of a SST tyre