VW Golf manuals

Volkswagen Golf Service & Repair Manual: Corrosion protection measures for wing surface in contact with wheel housing liner

Volkswagen Golf Service & Repair Manual / General information, paint / General notes / Corrosion protection measures for wing surface in contact with wheel housing liner

  Note
  The corrosion protection measure is to be carried out in the groove of the wing of all new replacement parts which have not had the additional sealant applied at the factory.
  The additional sealant is intended to prevent the wheel housing liner from possibly “scouring” the groove of the wing, which could cause corrosion.
–  Apply surfacer on inside and outside of wing.
–  After surfacer has been applied and has dried, apply and spread sealant -D 511 500 A2- in the contact area of wheel housing liner (groove of wing).

Corrosion protection measures for wing surface in contact with wheel housing liner

MaЯ a -  20 mm
   Height of seal
MaЯ b -  10 mm
   Width of seal
  Note
-Dimension b- can vary because the width of the edge of the groove differs among wings. Always ensure that the entire edge of the groove is sealed.
 
Before installing, seal inside of wheel arch and web plate with cavity sealant.
Product information:
  → Chapter „Anti-corrosion materials“
Pre-treatment of bonded surfaces when renewing laser-welded roofs
Using P180-grade sandpaper, dry-sand cathodic dip primer on bonding surface for roof → Item down to bare metal.   ...

Notes on treating corroded fold areas
Examples for corrosion in the fold area of bonnet, door or rear lid –  Remove corrosion using → Chapter „Pneumatic br ...

Other materials:

Washing the vehicle with a high-pressure cleaner
First read and observe the introductory information and safety warnings Follow the instructions provided by the manufacturer when cleaning your vehicle using a high-pressure cleaner. This applies in particular to the pressure and the spraying distance  . Maintain sufficient distance fro ...

Checking radial and lateral run-out on wheel rim
–  Attach rim to wheel balancing machine. –  Use the centring system for wheel balancing machines -VAS 5271-. –  Preload tyre gauge approx. 2 mm. –  Tu ...

Radio reception and aerials
First read and observe the introductory information and safety warnings For factory-fitted radio and navigation devices, the aerial for radio reception can be installed in various locations in the vehicle: On the inside of the rear window, together with the rear window heating. On ...

© 2016-2024 Copyright www.vwgolf.org