Volkswagen Golf Service & Repair Manual: Coolant pump, regulation of cooling system
- Assembly overview - coolant pump, thermostat
- Assembly overview - electric coolant pump
- Assembly overview - coolant temperature sender
- Removing and installing coolant pump
- Removing and installing toothed belt pulley for coolant pump, engine codes CHPA, CMBA, CPVA, CXSA, CZDA, CZCA, CPVB
- Removing and installing thermostat for large cooling circuit
- Removing and installing thermostat for small cooling circuit
- Removing and installing charge air cooling pump -V188-
- Removing and installing coolant temperature sender -G62
- Removing and installing coolant temperature sender at radiator outlet -G83
Checking cooling system for leaks
Special tools and workshop equipment
required
Cooling system tester -V.A.G 1274 B-
...
Assembly overview - coolant pump, thermostat
1 -
Thermostat housing
Removing and installing
→ Chapter
2 -
Thermostat
For small cooling circuit ...
Other materials:
Removing and installing rear belt guide
Removing
–
Remove luggage compartment side trim, estate
→ Chapter.
–
Unscrew the 2 bolts -1-, and
remove belt guide -2-.
...
Fitting a bicycle carrier on the mechanically positioned ball coupling
First read and observe the introductory information
and safety warnings The maximum permitted load on a bicycle carrier mounted
on the ball coupling is 80 kg at a distance of 300 mm. This distance
refers to the gap between the centre of gravity of the bicycle carrier (complete
with bicycle ...
Assembly overview - front three-point seat belt, 4-door model and estate
1 -
Bolt
If removed due to an accident with seat belt fastened, renew bolt.
40 Nm
2 -
Belt end fitting
Removing and installing
→ Chapter
3 -
Bolts
Qty. 2
4.5 Nm
...
