|
|
Assembly overview - front brakes PC57 and C60
Note
After every brake pad change, depress brake pedal firmly
several times with vehicle stationary, so that brake pads are
properly seated in their normal operating position.
Use the brake filling and bleeding equip ...
Removing tyres, run-flat tyres, ultra-high-performance tyres
Only trained personnel may perform any assembly work on
run-flat tyres and ultra-high-performance tyres.
If fitted, check tyre pressure sensor using vehicle
diagnostic tester, and renew it as necessary.
Note
...
Safety regulations for crash sensors (pressure sensors) for front side
airbags
The side airbag crash sensors respond to changes in pressure
and must therefore be treated with particular caution. Observe
the following:
The correct installation position is vitally important: only
install in the specified ...