First read and observe the introductory information and safety warnings
Cleaning windows and exterior mirrors
Moisten the windows and exterior mirrors with commercially available, alcohol-based glass cleaner.
Dry the glass surfaces with a clean chamois leather or a lint-free cloth. Chamois leathers that have been used on painted surfaces are not suitable for use on glass surfaces. They will be soiled with wax deposits which could smear the surfaces.
Use window cleaner or a silicone remover to clean off rubber, oil, grease and silicone deposits .
Removing wax
Car washes and care products could leave wax deposits on the glass surfaces. Wax residue can only be removed using a special cleaning product or cleaning cloths. Wax deposits on the windscreen can cause the wiper blades to rub. Volkswagen recommends using a glass cleaning cloth - G 052 522 A1 - to remove wax deposits from the windows and exterior mirrors each time the vehicle is washed.
A window cleaner specifically for removing wax will stop the blades rubbing if added to the windscreen wash water. Dilute the cleaner as instructed. Grease removing cleaners will not remove wax deposits .
Special cleaners, glass cleaners and glass cleaning cloths are available from Volkswagen dealerships.
Removing snow
Use a small brush to remove snow from the windows and exterior mirrors.
Removing ice
The best method for removing ice is to use a de-icer spray. If you use an ice scraper, do not move it to and fro, but push it in one direction only. Moving the ice scraper backwards can cause dirt to scratch the window.
WARNING
Dirty or misted windows reduce visibility and increase the risk of accidents and severe injuries.NOTICE
Snow chains
First read and observe the introductory information
and safety warnings Please heed legislation and also the permitted speed
when driving your vehicle with snow chains.
In winter conditions, snow chains will not only improve acceleration, but also
braking response.
Snow chains may only b ...
Assembly overview – repair kit for headlight housing, does not apply for LED
headlights
1 -
Headlight
2 -
Inner retaining tab
Removing and installing
→ Chapter
3 -
Bolt
Qty. 1
Specified torque: 2 Nm
4 -
Rear retain ...
Removing and installing locking mechanism for rear seat backrest
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331
Removing
–
Remove trim for locking mechanism
...