The following actions must always be carried out in the given order in preparation for changing the wheel :
In the event of a flat tyre, park your vehicle on a firm and level surface at a safe distance from the flow of traffic.
Switch on the electronic parking brake Braking, stopping and parking Brakes Parking .
Automatic gearbox: move the selector lever to position P Changing gear Changing gear Automatic gearbox see Automatic gearbox_0 Automatic gearbox see Changing gear_0 Automatic gearbox Manual gearbox see Changing gear_0 Manual gearbox .
Stop the engine and remove the key from the ignition Starting and stopping the engine Engine and ignition Ignition see Engine and ignition_0 .
Manual gearbox: select a gear Changing gear Changing gear Automatic gearbox see Automatic gearbox_0 Automatic gearbox see Changing gear_0 Automatic gearbox Manual gearbox see Changing gear_0 Manual gearbox .
Ensure that all vehicle occupants exit the vehicle and go to a safe position, e.g. behind the safety barrier.
Chock the wheel opposite the wheel being worked on with a stone or a similar object.
When towing a trailer, unhitch the trailer from the vehicle and park it properly.
Remove any items of luggage from the luggage compartment.
Remove the spare wheel or temporary spare wheel and vehicle toolkit from the luggage compartment.
Remove the hubcaps Hubcaps Hubcaps .
WARNING
Ignoring any of the items on this important safety checklist can lead to accidents and severe injuries.Removing and installing side spoiler
Removing
Special tools and workshop equipment
required
Hot air blower -V.A.G 1416
Note
Only the left side is shown. The right si ...
Balancing wheel, checking radial and lateral run-out on wheel rim
–
Attach rim to wheel balancing machine.
–
Use the centring system for wheel balancing machines -VAS
5271-.
–
Preload tyre gauge approx. 2 mm.
–
Tu ...
Removing and installing condenser
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331/- (5…50 Nm)
Air conditioner service station
Note
The pre ...