Volkswagen Golf Service & Repair Manual: Checking maximum wheel lock

Volkswagen Golf Service & Repair Manual / Running gear, axles, steering / Wheels, tyres, axle align / Wheel alignment / Checking maximum wheel lock

The maximum wheel lock is determined with the aid of the wheel alignment computer.

–	When the values for the maximum wheel lock lie outside the tolerances, then check following:

Are steering or suspension components damaged or deformed?

Are track rods visually OK.?

Is the symmetry of the track rods OK.?

Damaged components must be renewed.

–	If the steering wheel is crooked, check the following:

Check steering components for damage and deformation. If necessary, renew damaged components.

Check suspension components for damage and deformation. If necessary, renew damaged components.

Check symmetry of track rods also.

–	Measure dimension -a- of shorter track rod. Shorten longer track rod to same dimension. Screw track rod ball joint -1- deeper onto track rod -2-.

Dimension -a- must be the same on left side and right side track rod ball joints.

Maximum permissible difference between left and right < 2.5 mm.

–	When returning steering to central position, swivel steering wheel with even movements.

Checking maximum wheel lock

Vehicle data sticker

Explanation regarding “PR numbers” on vehicle data sticker Various types of running gear are installed depending on engine and equipment level. T ...

Vibration due to wheels/tyres - causes and rectification

...

Other materials:

Identification plates
There are different types of identification plates. When the auxiliary heater is replaced, check the type plate and the duplicate plate and replace as necessary. Identification plate on ...

Removing and installing upper transverse link, front-wheel drive
Special tools and workshop equipment required Torque wrench -V.A.G 1332- Removing – Loosen wheel bolts. – ...

Removing and installing front air distribution flap control motor -V426-, LHD vehicles
Special tools and workshop equipment required Vehicle diagnostic tester First carry out the following work: – Switch off all electrical consumers. – ...