Volkswagen Golf Service & Repair Manual: Changing headlights over from driving on right to driving on left, LED headlights

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Headlight / Changing headlights over from driving on right to driving on left, LED headlights

If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling oncoming traffic with the asymmetric low beam headlights.

Note

The conversion from driving on left to driving on right, or vice versa, is performed by means of the infotainment system.

It is only permissible to make use of the headlight converter for a short period of time. When permanently driving in the respective country during a longer period of time, suitable headlights need to be installed according to valid specifications.

–	On the display unit for front information display and operating unit control unit -J685-, press button CAR.

–	Press function buttons Setup and Light.

–	Perform adjustment in menu “Light Settings”.

Changing headlights over from driving on left to driving on right (dual halogen headlights)

If an RHD vehicle is driven in a left-traffic country, or vice versa, the headlights do not need to be adapted in any way.

Changing headlights over from driving on right to driving on left (gas discharge headlights with dynamic high beam control and LED daytime running light)

If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling on ...

Changing headlights over from driving on left to driving on right (gas discharge headlights)

If a right-hand drive vehicle is driven in a left-hand drive country, or vice versa, the headlights must be converted. This is necessary in order to avoid dazzling on ...

Other materials:

Assembly overview - toothed belt, engine codes CPTA, CHPA, CZEA, CZDA
1 - Toothed belt Before removing, mark direction of rotation with chalk or felt-tipped marker pen. Check for wear Removing → Chapter Installing (adjusting valve timing), CPTA, CZEA & ...

Safety precautions during road tests in which test and measuring equipment is used
Risk of injury due to unsecured test and measuring equipment If a front passenger airbag is triggered during an accident, unsecured test and measuring equipment can become dangerous projectiles. – Secure test and measuring equipment with seat belts on ...

Removing and installing fuel gauge sender -G-, vehicles with front-wheel drive
Removing – Remove fuel delivery unit → Chapter. – Note colour assignment of cables -1- for re-installation. – ...