Volkswagen Golf Owners Manual: Changing gear using Tiptronic

Volkswagen Golf Owners Manual / While driving / Starting the engine, changing gear and parking / Changing gear / Changing gear using Tiptronic

Fig. 138 Selector lever in Tiptronic position (left-hand drive). The controls are mirrored for right-hand drive vehicles

Fig. 139 Steering wheel with two paddles for Tiptronic

First read and observe the introductory information and safety warnings

Using Tiptronic, the gears can be shifted up and down manually in an automatic gearbox. The gear that is currently selected will be maintained when the Tiptronic programme is selected. This remains the case until the system does not perform a gear change due to the current driving situation.

Operating Tiptronic with the selector lever

Push the selector lever in position D/S to the right into the Tiptronic gate .

Gently push the selector lever forwards ⊕ or back ㊀ to shift gear up or down .

Operating Tiptronic with the paddles

In driving mode D or S, or in the Tiptronic gate, use the paddles on the steering wheel (arrows).

Pull the right paddle + towards the steering wheel to change up a gear.

Pull the left paddle – towards the steering wheel to change down a gear.

To leave Tiptronic mode, pull the right paddle + towards the steering wheel for approximately one second.

Tiptronic is automatically deactivated if the selector paddles are not operated for some time and the selector lever is not in the Tiptronic gate.

NOTICE

When accelerating, the gearbox automatically shifts up to the next gear shortly before the maximum permitted engine speed is reached.

When shifting down a gear manually, the gearbox will not change gear until the engine can no longer be overrevved.

Automatic gearbox: selecting a gear

Fig. 136 Left-hand drive vehicles: selector lever for automatic gearbox with lock button (arrow) Fig. 137 Right-hand drive vehicles: selector lever for automatic gearbox with lock button (arrow) ...

Driving with an automatic gearbox

First read and observe the introductory information and safety warnings The gearbox changes the forward gears up and down automatically. Driving down hills The steeper the gradient, the lower th ...

Other materials:

Removing and installing fuse holder A -SA-
Removing – Remove fuse holder B → Chapter. – Take securing bar -4- out of fuse holder B upwards. – Release retaining tab -1--arrow- a ...

Fitting control unit to hydraulic unit
Special tools and workshop equipment required ESD workplace -VAS 6613- Torque screwdriver -V.A.G 1624- Torx bit T25 Severe ...

Handling pressure tanks
Secure vessels against falling over! Secure standing cylinders against falling over and lying cylinders from rolling away. Do not throw pressure vessels! When falling, the containers may become sev ...