Removing and installing ambient temperature sensor -G17
Note
The ambient temperature sensor -G17- is used for determining
the outside temperature and as a switch-on condition of the
auxiliary and supplementary heater via CAN bus.
–
Removing and installing ambient temper ...
Removing and installing baffle plate, LHD vehicles
Removing
–
Depending on version, remove plastic bolt or plug
-2- and remove baffle plate
-1-.
Installing
–
Install in reverse order ...
Assembly overview - driver side airbag
1 -
Catch
To release, use a Torx screwdriver T25 of approx. 100 mm length
2 -
Steering column electronics control unit -J527-
With airbag coil connector and return ring with slip ring -F138-
Assembly overview
→ Elec ...