Volkswagen Golf Service & Repair Manual: Balancing wheel, conditions
Before you start balancing the wheels, the following
requirements must be met. |
Tyre pressure must be OK. |
Tread must not be worn on one side. Tread depth should be at
least 4 mm. |
The tyre must not show any signs of damage, for example
cuts, piercing, foreign bodies, etc. |
Wheel suspension and steering, including shock absorbers,
must be in perfect condition. |
You must have conducted a road test. |
|
|
|
If a customer brings a vehicle to the workshop complaining
about “vibration”, a road test is essential prior to balancing
the wheels.
...
Road test has been carried out
→ Chapter.
Clamp wheel into wheel balancing machine
Note
When b ...
Other materials:
Calibrating adaptive cruise control
Conditions
–
The adaptive cruise control unit -J428- needs to be
calibrated if the following conditions apply:
Adaptive cruise control unit -J428- has been removed and
then reinstalled or it has been ...
Removing and installing track rod
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Torque wrench -V.A.G 1332-
...
Renewing bulb for glove compartment light -W6-
Note
If an LED glove compartment light -W6- is faulty, the entire
light must be renewed.
Removing
–
Remove glove compartment light -W6-
→ Chapter.
...
© 2016-2024 Copyright www.vwgolf.org