Volkswagen Golf Service & Repair Manual: Assembly tools for single wire seals

Volkswagen Golf Service & Repair Manual / Electrical system, general information / Wiring / Wiring harness and connector repairs / Assembly tools for single wire seals

The assembly tools serve as a means of sliding the single wire seals fully into the contact housing without damage and thereby assure complete sealing between single wire and contact housing.

Four assembly tools for single wire seals are included in each wiring harness repair set -VAS 1978 B- and previous versions.

Assembling single wire seals → Chapter.

Assembly tools for single wire seals

Release tools for contacts

The various release tools serve as a means of detaching the different contacts from the contact housings without damage. A selection of release tools ...

Wire strippers -VAS 1978/3-

Wire strippers -VAS 1978/3- serve as a means of stripping insulation off wires and cutting wires in the correct manner. Wire strippers -VAS 1978/3- a ...

Other materials:

Overview of fitting locations - components not located in passenger compartment, Golf LHD
1 - Exhaust ventilation for passenger compartment Checking → Chapter Removing and installing → Chapter 2 - Ambient temperature sensor -G17- Removing and installing ...

Removing and installing rotary light switch -EX1-
Note The removal and installation procedures are described for LHD vehicles. Removal and installation for RHD vehicles are similar. Removing – Turn light switch to “0” position. ...

High-pressure sender -G65
This high-pressure sender -G65- is fitted in place of the air conditioning system pressure switch -F129-. When voltage is applied to the high-pressure sender, it generates a square wave signal, or data telegram. This signal changes when ...