Volkswagen Golf Service & Repair Manual: Assembly overview - window regulator
| 1 - | Front door |
| 2 - | Rear window regulator motor -V26/V27- |
- The door control unit is installed in door separated from window regulator motor
- Removing and installing → Chapter
| 3 - | Hexagon nut |
- Qty. 2
- 6 Nm
| 4 - | Window regulator |
- Removing and installing → Chapter
| 5 - | Bolt |
- Qty. 3 for window regulator motor
- 3 Nm
| 6 - | Window winder |
- Removing and installing → Chapter
| 7 - | Bolt |
- Qty. 3 for window winder mechanism
- 3 Nm
| 8 - | Window winder mechanism |
- Removing and installing → Anchor
Assembly overview - door components
Note
Only the left side is shown. The right side is similar.
1 -
Rear door
Removing and installing
→ Chapter
Adjusting
&# ...
Assembly overview - door handle and door lock
Note
Only the left side is shown. The right side is similar.
1 -
Door lock
Removing and installing
→ Chapter
2 ...
Other materials:
Preparatory measures for calibration
Extensive preliminary work is required before the actual
calibration can be carried out using → Vehicle
diagnostic tester.
Prerequisites:
Position vehicle on a firm and level surface.
...
Assembly overview - rear vehicle level senders, multi-link suspension,
front-wheel drive
Note
The vehicle level sender is available as a replacement part only
complete with coupling rod and upper and lower retaining plates.
1 -
Bolt
5 Nm
2 -
Rear vehicle level senders
Comp ...
Removing and installing air distribution flap control motor -V428-, RHD
vehicles
Special tools and workshop equipment
required
Vehicle diagnostic tester
First carry out the following work:
–
Switch off all electrical consumers.
–
...
