Volkswagen Golf Service & Repair Manual: Assembly overview - valves
| 1 - | Inlet valve |
| Do not rework. Only lapping in is permitted. |
| Valve dimensions → Chapter |
| Checking valve guides → Chapter. |
| 2 - | Exhaust valve |
| Do not rework. Only lapping in is permitted. |
| Valve dimensions → Chapter |
| Checking valve guides → Chapter. |
| 3 - | Cylinder head |
| 4 - | Valve stem seal |
| Renew → Chapter |
| 5 - | Valve spring |
| Installation position → Fig. |
| 6 - | Valve spring plate |
| 7 - | Valve cotters |
| 8 - | Roller rocker finger |
| Removing and installing → Chapter „Removing and installing camshaft housing“ |
| Mark installation position for re-installation. |
| Check roller bearing for ease of movement. |
| Lubricate contact surfaces before installing. |
| 9 - | Securing clip |
| For hydraulic compensation element. |
| 10 - | Hydraulic compensation element |
| Do not interchange |
| Oil contact surface |
|
|
Valve gear
...
Removing and installing camshaft control valve 1 -N205- and exhaust camshaft
control valve 1 -N318-
Note
On engines with codes CMBA, CPVA, CXSA, CZCA and CPVB, only
camshaft control valve 1 -N205- is installed.
Removing
...
Other materials:
Cleaning and caring for natural leather covers
First read and observe the introductory information
and safety warnings Please contact a Volkswagen dealership or other qualified
workshop if you have any questions on cleaning and caring for the leather equipment
in your vehicle.
Care and use
Natural leather is sensitive and requires reg ...
Assembly overview - suspension, multi-link suspension, four-wheel drive
1 -
Drive shaft
2 -
Bolt
Renew after removing
70 Nm +90°
3 -
Wheel bearing housing
Removing and installing
→ Chapter
4 -
...
Removing and installing front air distribution flap actuation unit,
Climatronic, RHD vehicles
Removing
–
Remove dash panel central tube
→ General body repairs, interior; Rep. gr.70.
–
Remove air duct for defroster vent
→ Chapter.
–&nb ...
