Volkswagen Golf Service & Repair Manual: Assembly overview – wiper motor and wiper frame
Note| The illustration shows fitting locations for LHD vehicles. Fitting locations for RHD vehicles are similar. |
| 1 - | Wiper motor |
| Removing and installing → Chapter |
| 2 - | Bolts |
| Qty. 3 |
| Specified torque: 9 Nm - 1 Nm |
| 3 - | Wiper frame |
| Removing and installing → Chapter |
| 4 - | Nut |
| Specified torque: 25 Nm - 1 Nm |
Assembly overview - windscreen wiper system
Note
The illustration shows fitting locations for LHD vehicles. Fitting
locations for RHD vehicles are similar.
1 -
Wiper blade on driver side
...
Moving wipers to service position
Caution
Risk of damaging the bonnet when moving wipers back
into the park position.
...
Other materials:
Checking and refilling the windscreen washer fluid level
Fig. 91 In the engine compartment: cap
of washer fluid reservoir
First read and observe the introductory information
and safety warnings The windscreen washer fluid level should be checked regularly
and topped up as necessary.
Open the bonnet .
The washer fluid reservoir is ...
Removing and installing retaining plate for manually operated anti-dazzle
interior mirror, with rain and light sensor -G397- and without front camera for
driver assist systems -R242-
Note
With the repair procedure described, it is no longer
necessary to renew the windscreen.
At the same time, it is also possible to reuse the
old mirror base which has fa ...
Infrared heater -VAS 6878-
Designation:
Infrared heater -VAS 6878-
Product description:
The infrared heater is used to dry putty, filler, base coat,
top coat and clear coat on vertical or horizontal surfaces.
...
