1 - | Headlight |
2 - | Inner retaining tab |
Removing and installing → Chapter |
3 - | Bolt |
Qty. 1 |
Specified torque: 2 Nm |
4 - | Rear retaining tab |
Removing and installing → Chapter |
5 - | Bolt |
Qty. 3 |
Specified torque: 2 Nm |
6 - | Bolt |
Qty. 1 |
Specified torque: 2 Nm |
7 - | Upper retaining tab |
Removing and installing → Chapter |
8 - | Bolt |
Qty. 2 |
Specified torque: 2 Nm |
9 - | Outer retaining tab |
Removing and installing → Chapter |
Introduction
This chapter contains information on the following subjects:
→ Centre cover
→ Wheel cover
→ Wheel bolt caps
Additional information and warnings:
Cleaning and caring for the vehicle exterior
Vehicle toolkit
Changing a wheel
Breakdown set
WARN ...
Removing and installing USB hub -R293-
Removing
–
Switch off ignition and all electrical consumers.
–
Remove ignition key, if inserted.
–
Remove centre console insert
→ General body repairs ...
Overview of fitting locations - front control motors, air conditioning system
with electric/manual controls, RHD vehicles
1 -
Temperature flap control motor -V68-
Checking: with vehicle diagnostic tester
Removing and installing
→ Chapter.
Renewing: initiate basic setting using vehicle diagnostic tester.
2 -&nb ...