1 - | Bolt |
Specified torque 2 Nm |
2 - | Brake light connector |
3 - | High-level brake light |
With high-level brake light bulb -M25-. |
Removing and installing → Chapter |
4 - | Connection for washer fluid line |
5 - | Bolt |
Specified torque 2 Nm |
6 - | Bolt |
Specified torque 2 Nm |
7 - | Roof spoiler |
Removing and installing roof spoiler → General body repairs, exterior; Rep. gr.66 |
Removing and installing parking aid control unit -J446-, left-hand drive
vehicle
Note
When renewing the control unit, select
Renew function for the respective control unit in
Guided fault finding or
Guided functions mode
→ Vehicle
diagnostic tester.
Removing
â ...
Removing and installing brake servo for vehicles with 1.2 l and 1.4 l petrol
engines
Note
If there are problems with the brake servo, first check the
brake servo vacuum system
→ Chapter.
Special tools and workshop equipment required
Release tool -T10159 ...
Introduction
This chapter contains information on the following subjects:
→ Stowage compartment on the driver side  
→ Stowage compartment in the roof console (glasses compartment)  
→ Stowage compartment in the front centre console  
→ Stowage compartment in the front ...