Volkswagen Golf Service & Repair Manual: Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles

Volkswagen Golf Service & Repair Manual / Brake system (hybrid) / Brakes, hydraulics, regulator, servo / Brake servo and brake master cylinder / Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles

Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles

1 -	Brake system pressure accumulator -VX70-

Removing and installing → Chapter

2 -

Bracket

Check for secure seating after installing

3 -

Bolt

8 Nm

4 -	Electrical connector

5 -	Rubber damper

Do not press rubber dampers out of bracket when installing bracket.

6 -

Bracket

7 -	Hexagon nut

20 Nm

8 -	Brake line

To brake master cylinder

With thread M10 x 1

14 Nm

9 -

Bolt

8 Nm

10 -

Dust cap

Fit onto bleeder valve

11 -	Bleeder valve

Before screwing in, apply thin coat of assembly paste -G 052 150 A2- to thread.

8 Nm

Assembly overview - brake servo/brake master cylinder, RHD vehicles

Complete brake master cylinders and brake servos can be renewed independently of each other. 1 - Mounting bracket with brake pedal Assembly ...

Assembly overview – Brake system pressure accumulator -VX70-, RHD vehicles

1 - Brake system pressure accumulator -VX70- Removing and installing → Chapter 2 - Brake line To ...

Other materials:

Removing and installing door inner seal
During production, a sealant is applied to the door inner seals, which are then placed on the door flange and rolled on. Note When removing the seal, the sealant is distributed across the inside of the seal. The sid ...

Vehicles with multilink suspension
1 - Rubber mounting Renew if damaged 2 - Bolt 20 Nm 3 - Mounting Renew if damaged 4 - Centre silencer Combined in one u ...

Checking colour indicator, “2-colour”
WARNING Danger of injury! Observe warning notices and safety regulations → Chapter! General information about colour indicator: The genera ...