VW Golf manuals

Volkswagen Golf Service & Repair Manual: Assembly overview – Blind Spot Monitor (Blind Spot Detection)

Assembly overview – Blind Spot Monitor (Blind Spot Detection)

1 -  Blind Spot Monitor warning lamp in left exterior mirror -K303-
Removing and installing → Chapter
2 -  Blind Spot Monitor warning lamp in right exterior mirror -K304-
Removing and installing → Chapter
3 -  Bracket
4 -  Nut
6 Nm
5 -  Electrical connector
6 -  Blind Spot Monitor control unit -J1086-
Master
Removing and installing → Chapter
7 -  Bracket
Lower contact point
8 -  Bolt
2 Nm
9 -  Bolt
2 Nm
10 -  Blind Spot Monitor control unit 2 -J1087-
Slave
Removing and installing → Chapter
11 -  Electrical connector
12 -  Nut
2 Nm
13 -  Bracket
Removing and installing warning lamp for Blind Spot Monitor K303/K304
The warning lamp for Blind Spot Monitor -K303-/-K304- is integrated into the mirror glass and cannot be renewed individually.
–  Removing and installing mirror glass → General body repairs, exterior; Rep. gr.66.
   
Blind Spot Monitor (Blind Spot Detection)
...

Removing and installing Blind Spot Monitor control unit J1086/J1087
Removing     –  Disconnect electrical connector -2-. –  Unscrew nut -1 ...

Other materials:

Overview of fitting locations - front control motors, Climatronic, LHD vehicles
In vehicles with start-stop system, note abort conditions: → Chapter     1 -  Left temperature flap control motor -V158- With potentiometer for left temperature flap control motor -G ...

Displays
Fig. 172 In the instrument cluster display: distance warning display Fig. 173 The display in the instrument cluster: advance warning display First read and observe the introductory information and safety warnings Distance warning If the safe distance to the vehicle in front drops below ...

Assembly overview - side spoiler
1 -  Side spoiler 2 -  Adhesive strips Part of side spoiler 3 -  Rear window 4 -  Removal aid For protective film of adhesive tape 5 -  Bonding surface ...

© 2016-2024 Copyright www.vwgolf.org