1 - | Nut |
Renew after removing |
2 - | Washer |
3 - | Upper transverse link |
Removing and installing → Chapter |
4 - | Bolt |
Renew after removing |
Always tighten threaded connections in unladen position → Chapter |
130 Nm +180° |
5 - | Wheel bearing housing |
6 - | Bolt |
Renew after removing |
Always tighten threaded connections in unladen position → Chapter |
70 Nm +180° |
7 - | Nut |
Renew after removing |
8 - | Spreader rivet |
9 - | Stone deflector |
10 - | Bolt |
8 Nm |
11 - | Lower transverse link |
Removing and installing → Chapter |
12 - | Eccentric bolt |
A wheel alignment check must be performed if loosened → Chapter |
Do not turn more than 90° in either direction (i.e. from minimum to maximum adjustment position). |
13 - | Eccentric washer |
Inner hole with lug |
14 - | Nut |
Renew after removing |
Always tighten threaded connections in unladen position → Chapter |
95 Nm |
15 - | Subframe |
16 - | Eccentric bolt |
A wheel alignment check must be performed if loosened → Chapter |
Do not turn more than 90° in either direction (i.e. from minimum to maximum adjustment position). |
17 - | Eccentric washer |
Inner hole with lug |
18 - | Nut |
Renew after removing |
Always tighten threaded connections in unladen position → Chapter |
95 Nm |
Removing and installing wiper blade
Caution
Risk of damage to the wiper blade.
Joint-free wipers are very flexible. To lift the
wiper blades off the rear window, touch them only in the
area in which the wiper blades a ...
Assembly overview - suspension strut, upper suspension link
1 -
Spring seat
Note correct installation position
2 -
Shock absorber
Different versions are possible. Refer to
→ Electronic Parts Catalogue “ETKA”.
3 -
Bolt
...
Battery terminal connection
WARNING
Danger of injury! Observe warning notices and safety
regulations
→ Chapter!
Caution
To prevent damage to ...