Volkswagen Golf Service & Repair Manual: Assembly overview - transverse link, multi-link suspension, four-wheel drive
3 - |
Upper transverse link |
Removing and installing
→ Chapter |
Always tighten threaded connections in unladen position
→ Chapter |
6 - |
Wheel bearing housing |
Always tighten threaded connections in unladen position
→ Chapter |
10 - |
Lower transverse link |
Removing and installing
→ Chapter |
A wheel alignment check must be performed if loosened
→ Chapter |
Do not turn more than 90° in either direction (i.e. from minimum to
maximum adjustment position). |
Always tighten threaded connections in unladen position
→ Chapter |
A wheel alignment check must be performed if loosened
→ Chapter |
Do not turn more than 90° in either direction (i.e. from minimum to
maximum adjustment position). |
Always tighten threaded connections in unladen position
→ Chapter |
1 -
Nut
Renew after removing
2 -
Washer
3 -
Upper transverse link
Removing and instal ...
1 -
Subframe
2 -
Bolt
Renew after removing
70 Nm +180°
3 -
Wheel bearing housin ...
Other materials:
Assembly overview - front side airbag
1 -
Backrest frame
2 -
Hook
For attaching side airbag to backrest frame
3 -
Front side airbag
Driver side: with side airbag igniter on driver side -N199-
Front passenger side: with side airbag igniter o ...
Checking seat belts
WARNING
The seat belt system must be inspected
systematically after every accident! If damage is
determined at any of the points to be checked, customer
must be informed regarding necessity of changing belt ...
Adjusting door
Special tools and workshop equipment
required
Door alignment tool -3320-
Universal joint for 3320 -3320/1-
Bit for 3320 -3320/2-
...
© 2016-2024 Copyright www.vwgolf.org