Volkswagen Golf Service & Repair Manual: Assembly overview - toothed belt cover
| 1 - | Lower toothed belt guard |
| 2 - | Bolt |
| 8 Nm |
| 3 - | Engine support |
| Specified torque and tightening sequence → Fig. |
| 4 - | Bolt |
| Specified torque and tightening sequence → Fig. |
| 5 - | Upper toothed belt guard |
| 6 - | Bolt |
| 8 Nm |
Assembly overview - toothed belt, engine codes CPTA, CHPA, CZEA, CZDA
1 -
Toothed belt
Before removing, mark direction of rotation with chalk or
felt-tipped marker pen.
Check for wear
Remo ...
Other materials:
Removing and installing vacuum sender -G608
Note
The vacuum sender -G608- is only installed in selected
petrol engines.
Removing
On »R« vehicles:
–
Open clamp -2- and screw-typ ...
Assembly overview - manually operated or automatic anti-dazzle interior
mirror, with rain and light sensor -G397- and without front camera for driver
assist systems -R242-
1 -
Front cover
For mirror base
2 -
Main beam assist control unit -J844-
Equipment version
Not sold separately
3 -
Retaining plate
For interior mirror
Bonded to windscreen.
Removing and installi ...
Introduction
This chapter contains information on the following subjects:
→ Petrol
→ Diesel
→ Bioethanol (Ethylalcohol)
Different engines require different fuels. The factory-fitted sticker on the
inside of the tank flap indicates the fuel type that is required for your ...
