Volkswagen Golf Service & Repair Manual: Assembly overview - three-point seat belt, estate, with belt tensioner
- Removing and installing
→ Chapter
- Removing and installing
→ Chapter
3 - |
Electrical wiring harness |
- If removed due to an accident with seat belt fastened, renew bolt
- 40 Nm
6 - |
Bolt for rear outer belt end fitting |
- If removed due to an accident with seat belt fastened, renew bolt
- 40 Nm
7 - |
Rear outer belt end fitting |
- Removing and installing
→ Chapter
1 -
Belt guide
Removing and installing
→ Chapter
2 -
Belt inertia reel
Removing and installing
→ Chapte ...
1 -
Belt buckle
With rear belt switch, front passenger side -E259-
Removing and installing
→ Chapter
Always renew after belt tensioner has deploye ...
Other materials:
Outer shoulder wear
Unsuitable use of self-levelling adjustments on pneumatic
suspension system
The use of the offroad level is recommended only for driving
offroad. Permanent use of the offroad level during normal road
operation can lead to increased tyre ...
Notes on treating corroded fold areas
Examples for corrosion in the fold area of bonnet, door or
rear lid
–
Remove corrosion using
→ Chapter „Pneumatic brush grinder set -VAS 6446-“ or
→ Chapter „Brush grinder set -VAS 6776-“.
...
Removing and installing spring, torsion beam axle
Special tools and workshop equipment
required
Spring compressor -V.A.G 1752/1-
Spring retainer -V.A.G 1752/3A-
...
© 2016-2024 Copyright www.vwgolf.org