Volkswagen Golf Service & Repair Manual: Assembly overview - three-point seat belt, 4-door model, without belt tensioner
| 1 - | Belt inertia reel
|
- Removing and installing → Chapter
| 2 - | Bolt |
- If removed due to an accident with seat belt fastened, renew bolt
- 40 Nm
| 3 - | Bolt |
- If removed due to an accident with seat belt fastened, renew bolt
- 40 Nm
| 4 - | Rear outer belt end fitting |
- Removing and installing → Chapter
Assembly overview - three-point seat belt, 2-door model, with belt tensioner
1 -
Belt inertia reel
Removing and installing
→ Chapter
2 -
Electrical wiring harness
3 -
Bolt
...
Assembly overview - three-point seat belt, 4-door model, with belt tensioner
1 -
Belt inertia reel
Removing and installing
→ Chapter
2 -
Electrical wiring harness
3 -
Bolt
...
Other materials:
Removing and installing manually operated or automatic anti-dazzle interior
mirror, with rain and light sensor -G397- and without front camera for driver
assist systems -R242-
Removing
–
Swing interior mirror downwards by approx. 25° as far as
stop.
–
Pull rear cover -2- downwards
-arrow- while simultaneously
releasing catches -1- using a
screwdriver.
...
Removing and installing throttle valve module -GX3-
Throttle valve module -GX3- consists of
Throttle valve module -J338-
Throttle valve drive for electronic power control -G186-
Throttle valve drive angle sender 1 for electronic power
co ...
Accessories and parts
First read and observe the introductory information
and safety warnings Volkswagen recommends that you seek advice from a Volkswagen
dealership before purchasing accessories, spare parts or service fluids. For example,
if the vehicle is to be retrofitted with accessories or if parts have to ...
