1 - | Bulb holder |
For left reversing light bulb -M16-/right reversing light bulb -M17-. |
Removing and installing → Chapter |
2 - | Reversing light bulb |
Left reversing light bulb -M16- |
Right reversing light bulb -M17- |
Removing and installing → Chapter |
3 - | Seal |
Self-adhesive |
Renew if damaged. |
4 - | Left tail light 2 -MX5-/right tail light 2 -MX6- |
Tail light in rear lid |
Removing and installing → Chapter |
5 - | Nut |
Qty. 2 |
Specified torque: 3 Nm |
Checking outer constant velocity joint
The joint is to be dismantled to renew the grease if it is
heavily soiled, or to check the running surfaces of the balls
for wear and damage.
Removing
–
Before disman ...
Preface
The contents of this guide are separated into two parts.
The first part contains information and important notes on
the subject of “Trailer operation”. The technical prerequisites
for towing trailers or the function of the trailer control ...
Removing and installing auxiliary air heater element -Z35- with auxiliary
air heater control unit -J604-, LHD vehicles
Removing
–
Remove driver side knee airbag
→ General body repairs, interior; Rep. gr.69.
–
Remove left centre console trim in footwell
→ General body repairs, interior ...