Volkswagen Golf Service & Repair Manual: Assembly overview - steering rack, left-hand drive
 Caution
|
| 1 - | Fastener |
| 2 - | Steering column |
| 3 - | Bolt |
| Specified torque → Chapter „Assembly overview - steering column“ |
| 4 - | Steering rack |
| Removing and installing → Chapter |
| Different versions possible. Refer to → Electronic Parts Catalogue “ETKA” |
| With power steering control unit -J500- |
| Can be tested in “Guided fault finding” using → Vehicle diagnostic tester |
| 5 - | Nut |
| Renew after removing |
| 20 Nm +90° |
| 6 - | Left wheel bearing housing |
| 7 - | Bolt |
| Renew after removing |
| 70 Nm +90° |
| 8 - | Subframe |
| 9 - | Right wheel bearing housing |
| 10 - | Heat shield |
| Different versions possible depending on engine version. Refer to → Electronic Parts Catalogue “ETKA” |
| 11 - | Bolt |
| Either qty. 3 or qty. 4 are fitted depending on engine version. Refer to → Electronic Parts Catalogue “ETKA” |
| 8 Nm |
| 12 - | Wiring |
Steering rack
...
Assembly overview - steering rack, right-hand drive
Caution
The following work must not be performed while the universal
joint is separated from the steering rack:
Connect battery ...
Other materials:
Removing and installing rear window wiper motor -V12-
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Removing
–
Remove wiper arm
→ Chapter.
...
Removing and installing valve stem seals (cylinder head installed)
Special tools and workshop equipment
required
Spark plug socket and extension -3122 B-
Removal and installation device for valve ...
Safety precautions when working on the cooling system
Risk of scalding by hot coolant
When the engine is warm, the cooling system is under pressure.
Danger of scalding due to steam and hot coolant.
–
Always wear safety gloves.
–
Always wear safety goggles.
– ...
