Volkswagen Golf Service & Repair Manual: Assembly overview - steering column
Note
| Always renew self-locking nuts. |
| Always renew corroded nuts and bolts. |
| Always renew nuts and bolts that have been tightened further by a
set angle. |
| 1 - |
Central pipe of dash panel |
| Loosening and tightening
→ Chapter |
| 4 - |
Electronic steering column lock control unit -J764- |
| For vehicles with keyless entry and start system “Keyless Access” |
| Removing and installing
→ Chapter |
| Observe tightening sequence, LHD
→ Anchor. |
| Observe tightening sequence, RHD
→ Anchor. |
| Removing and installing
→ Chapter |
| When installing, steering column must be engaged at mounting bracket
for central tube for dash panel (assists with installation). |
| Different versions possible. Refer to
→ Electronic Parts Catalogue “ETKA” |
Visual check
–
Check all steering column parts for damage.
Checking function
–
Ch ...
Other materials:
Assembly overview - brake caliper FS III
When carrying out repairs, install all parts supplied in repair kit.
Use only methylated spirits for cleaning the brake.
Apply thin coat of lithium grease -G 052 150 A2- to brake cylinder,
piston and seal.
1 -
Dust cap
...
Mobile telephone preparation, Bluetooth hands-free system
Bluetooth hands-free system is integrated in control unit 1
for information electronics -J794-.
Connection to mobile telephone -R54- is established via
Bluetooth.
Aerial for Bluetooth -R152- is integrated into control un ...
Removing and installing dash panel insert trim
Special tools and workshop equipment
required
Removal wedge -3409-
Removing
–
Release locking lever of steering wheel pos ...
© 2016-2024 Copyright www.vwgolf.org
Steering column
Checking steering column for damage