1 - | Starter -B- |
Removing and installing → Chapter |
2 - | Double stud |
Specified torque: 80 Nm |
3 - | Earth cable |
Depending on vehicle equipment |
4 - | Nut |
Depending on vehicle equipment |
Specified torque: 20 Nm |
5 - | Electrical connector |
6 - | Nut |
Specified torque: 20 Nm |
7 - | Cap |
8 - | Terminal 30/B+ |
9 - | Nut |
Depending on vehicle equipment |
Specified torque: 20 Nm |
10 - | Earth cable |
Depending on vehicle equipment |
11 - | Bracket |
For wiring harness |
Assembly overview - fuel tank, vehicles with multi-link rear suspension
1 -
Fuel line
Vehicles with auxiliary heater
To metering pump -V54-
Do not kink
To pull off, press release button on connection.
Plug-in connectors must engage »audibly«
when joined. ...
Removing and installing brake pads, front brakes
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Piston resetting appliance -T 10145-
...
Checking electromechanical parking brake, vehicles with four-wheel drive
Activate »TЬV mode«:
Seat belt is fitted
Rear axle on single-axle roller dynamometer
Engine is switched off and ignition is switched on
Auto-hold is switched o ...