Volkswagen Golf Service & Repair Manual: Assembly overview - starter, vehicles with dual clutch gearbox (DQ250-6F)
| 1 - | Starter -B- |
| Removing and installing → Chapter |
| 2 - | Bolt |
| Specified torque: 40 Nm |
| 3 - | Electrical connector |
| 4 - | Nut |
| Specified torque: 20 Nm |
| 5 - | Cap |
| 6 - | Terminal 30/B+ |
| 7 - | Nut |
| Depending on vehicle equipment |
| Specified torque: 20 Nm |
| 8 - | Earth cable |
| Depending on vehicle equipment |
| 9 - | Bolt |
| Specified torque: 40 Nm |
Assembly overview - starter, vehicles with dual clutch gearbox (DQ200–7F)
1 -
Starter -B-
Removing and installing
→ Chapter
2 -
Double stud
Specified torque: 80 Nm
...
Removing and installing starter, vehicle with manual gearbox
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
...
Other materials:
General description
WARNING
Danger of injury.
Before working on the battery, read through the
warning and safety regulations carefully, and comply
with them
→ Chapter.
...
Adjusting headlight installation position
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Torque screwdriver -VAS 6494-
...
Changing headlights over from driving on right to driving on left, LED
headlights
If a right-hand drive vehicle is driven in a left-hand drive
country, or vice versa, the headlights must be converted. This
is necessary in order to avoid dazzling oncoming traffic with
the asymmetric low beam headlights.
Note
...
