Volkswagen Golf Service & Repair Manual: Assembly overview - standard wheel

Volkswagen Golf Service & Repair Manual / Wheels and Tyres Guide - General Information / Overview of components / Assembly overview - standard wheel

Assembly overview - standard wheel

1 -

Wheel

Fitting wheels → Chapter

2 -	Wheel bolts

Different versions → Chapter

3 -

Tyres

→ Chapter „Information on tyres“

4 -	Valve/tyre pressure sensor

Always renew valve

Use only correct valves as specified in → Electronic Parts Catalogue “ETKA”

→ Chapter „Tyre pressure sensor“

5 -

Rim

Observe fitting instructions → Chapter

→ Chapter „Information on wheel rims“

→ Chapter „Structure of wheel rim“

6 -	Adhesive balancing weights

Not more than 60 g permitted per wheel rim flange

Remove dirt and grease from wheel rim at bonding point

Pull off backing foil

Bond on balancing weights at surfaces provided for this purpose

7 -	Anti-theft wheel bolt

Observe the fitting instructions → Chapter

Handling → Fig.

8 -	Adapter for anti-theft wheel bolt

Fit onto wheel bolt → Fig.

9 -	Cap for anti-theft wheel bolts

10 -	Caps for wheel bolts

11 -	Wheel bolts

Specified torque: → Running gear, axles, steering; Rep. gr.44

Note

Make sure the correct wheel bolts are fitted → Electronic Parts Catalogue “ETKA”

Observe fitting instructions → Chapter

12 -	Wheel hub cover

Removing and installing → Chapter

Overview of components

...

Assembly overview - wheel, PAX

1 - Wheel Fitting wheels → Chapter 2 - Wheel bolts Different versions → Chapter ...

Other materials:

Brake support systems
First read and observe the introductory information and safety warnings The brake support systems ESC, ABS, BAS, TCS and EDL only function when the engine is running. They make a considerable contribution to active driving safety. Electronic stability control (ESC) The ESC helps to reduc ...

Assembly overview - driver side footwell cover
1 - Driver side footwell cover Removing and installing → Chapter 2 - Bracket 3 - Bolt 1.5 Nm ...

Overview of fitting locations - fuel supply system, Golf Variant
Note Fuel lines are secured with O-type clips. These O-type clips must always be renewed every time they are removed. Start engine if fuel tank was empty. Then start the auxiliary heater repeatedly until the heater d ...