Volkswagen Golf Service & Repair Manual: Assembly overview - speed sensor on rear axle
| Before inserting sensor, clean inner surface of fitting hole and
coat it with high-temperature paste -G 052 112 A3-. |
| Removing and installing
→ Chapter |
| 3 - |
Wheel hub with wheel bearing unit |
| The ABS sensor ring is integrated in the wheel bearing unit. |
1 -
ABS speed sensor
Before inserting sensor, clean inner surface of fitting hole and
coat it with high-temperature paste -G 052 112 A3-.
...
Note
Removal and installation is described for the front left
speed sensor. Removal and installation of the front right speed
sensor is analogous.
...
Other materials:
Switching off auxiliary and supplementary heater
If the button instant heat button has been pressed, or after
the preset operating time has expired or the coolant has reached
a temperature of 88° C, the combustion is ended and the run-on
mode begins. The circulation pump -V55- and the combustion air
...
Interior and reading lights
First read and observe the introductory information
and safety warnings
Button
Function
Switches the front interior lights on or off.
Switches the rear interior lights on or off.
Switches the d ...
Flat spots caused by storage or handling
What is a flat spot?
The terms flat area and flats are also used for the term
flat spot.
Flat spots caused by storage or handling also cause
vibration in the same way as incorrectly balanced wheels do. It
is import ...
© 2016-2024 Copyright www.vwgolf.org
Assembly overview - speed sensor on front axle
Removing and installing speed sensors on front axle -G45-/-G47-