Volkswagen Golf Service & Repair Manual: Assembly overview - speed sensor on front axle
| 1 - | ABS speed sensor |
| Clean inside surface of hole before inserting sensor |
| Coat inside surface with high-temperature paste -G 052 112 A3- |
| Removing and installing → Chapter |
| 2 - | Bolt |
| 8 Nm |
| 3 - | Drive shaft |
| Assembly overview → Running gear, axles, steering; Rep. gr.40. |
| Removing and installing → Running gear, axles, steering; Rep. gr.40. |
| 4 - | Wheel hub with wheel bearing unit |
| The ABS sensor ring is integrated in the wheel bearing unit. |
| Check ABS sensor ring → Chapter |
| Removing and installing → Running gear, axles, steering; Rep. gr.40. |
Sensors
...
Assembly overview - speed sensor on rear axle, front-wheel drive
1 -
ABS speed sensor
Clean inside surface of hole before inserting sensor
Coat inside surface with high-temperature paste -G 052 112 A3-
...
Other materials:
Removing and installing front 3-point seat belt, 4-door model and estate
Removing
WARNING
Observe safety instructions for pyrotechnic
components
→ Chapter.
Observe disposal regulations for p ...
Removing and installing seat trim on tunnel side
Note
Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate.
Special tools and workshop equipment
required
...
Removing and installing window slot outer seal
Note
The core of the window slot outer seal is a metal
insert.
If it is bent or distorted, the window slot outer
seal cannot be straightened out anymore. It will remain
...
