Volkswagen Golf Service & Repair Manual: Assembly overview - sill panel moulding
Note
The illustration shows the sill panel moulding on the left side. The
right-hand side is similar (mirror image of left-hand side). |
I: sill panel moulding, 4-door model |
II: sill panel moulding, 2-door model |
- Removing and installing
→ Chapter
- Insert into sill panel moulding
- Remove any retaining clips left in body mountings using removal tool
-T40280- and fit them in sill panel moulding for installation.
- Renew any damaged or deformed retaining clips
Note
The illustration shows the A-pillar trims on the left side.
The right-hand side is similar (mirror image of left-hand side).
...
Other materials:
General notes on tyre noise
Tyre noise that can be heard by the human ear is caused by
vibrations which are transmitted by the air from the source of
the sound to our ears.
Of interest here are the noises caused by certain
characteristics and effects while the tyre ...
Opening or closing the electric panorama sliding/tilting roof
Fig. 40 In the headliner: button for the
electric panorama sliding/tilting roof
First read and observe the introductory information
and safety warnings The electric panorama sliding/tilting roof works when
the ignition has been switched on. The electric panorama sliding/tilting roof can
...
Eliminating flat spots caused by storage or handling
Eliminating flat spots caused by storage or handling
Flat spots caused by storage or handling cannot be
eliminated from the tyre using workshop equipment.
Flat spots caused by storage or handling can be removed onl ...
© 2016-2024 Copyright www.vwgolf.org