Volkswagen Golf Service & Repair Manual: Assembly overview - rear shelf support
Note
The illustration shows the rear shelf support on the left side. The
right-hand side is similar (mirror image of left-hand side). |
- Removing and installing
→ Chapter
- Renew clip if damaged or deformed
- Insert in rear shelf support.
- Remove any retaining clips left in body mountings using removal tool
-T40280-
- Renew any damaged or deformed retaining clips
Note
The illustration shows the luggage compartment side trim on the
left side. The right-hand side is similar (mirror image of left-hand
side).
1 -&n ...
Other materials:
Removing and installing damper weight for refrigerant line, low-pressure
side
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331/- (5…50 Nm)
Removing
–
Observe safety precautions when working in the ...
Cigarette lighter -U1-
The following descriptions apply to the rear left cigarette
lighter -U3-, rear right cigarette lighter -U7-, rear cigarette
lighter -U9-, 12 V socket 2 -U18-, 12 V socket 3 -U19-, 12 V
socket 4 -U20-, cigarette lighter 2 -U25- and 12 V socket 5
-U26- so ...
Painting parking aid sensor
To avoid malfunctions in the parking aid sensor, always
observe the following when painting:
Painting new parts
Maximum layer thickness 125 µm; a measurement of layer depth
is absolutely essential following ...
© 2016-2024 Copyright www.vwgolf.org