Volkswagen Golf Service & Repair Manual: Assembly overview - rear seat backrest cover and padding
| 1 - | Backrest cover |
- Different equipment versions
- Allocation → Electronic Parts Catalogue
- Removing and installing backrest cover with backrest padding → Chapter
- Separating backrest cover from backrest padding → Chapter
- After installation, check that there are no creases in seat
| 2 - | Upholstery clip |
- For attaching backrest cover to backrest padding
- Renew after removal
- When installing, fit in same location using upholstery clip pliers -V.A.G 1634
| 3 - | Backrest padding |
- Allocation → Electronic Parts Catalogue
- Removing and installing backrest cover with backrest padding → Chapter
- Separating backrest cover from backrest padding → Chapter
| 4 - | Backrest frame |
| 5 - | Beading strips |
- Sewn to backrest cover
- For attaching backrest cover to backrest frame
Assembly overview - cover and padding for bench seat
1 -
Seat frame
2 -
Seat padding
Allocation
→ Electronic Parts Catalogue
Removing and installing seat cover and seat paddi ...
Removing and installing bench seat cover and padding
Removing
–
Remove rear bench seat
→ Chapter.
–
...
Other materials:
Without roller dynamometer for four-wheel drive vehicles
Note
If no test rig is available for four-wheel drive vehicles,
the brake test can also be carried out on a standard single-axle
roller dynamometer as follows:
–
Drive vehicle forwards onto the rollers.
...
Charge factor
There must be space both for liquid and vapour in a
container. As the temperature rises, the liquid expands. The
space occupied by the vapour becomes smaller. Eventually, there
will only be liquid in the container. After that time, even a
small increase ...
Removing and installing belt height adjuster, 4-door model and estate
Removing
–
Press belt height adjuster button and move slider of belt
height adjuster to lowest position.
–
Detach upper B-pillar trim
→ Chapter.
–
...
