|
1 - | Brake caliper |
2 - | Damper bushes |
3 - | Guide pin |
4 - | Cover caps |
5 - | Hexagon socket head bolt |
8 Nm |
6 - | Parking brake motor |
7 - | Sealing ring |
Renew |
8 - | Thrust nut |
Removing and installing not possible |
9 - | Sealing ring |
Removing and installing not possible. |
10 - | Piston |
Removing and installing not possible. |
11 - | Protective cap |
Removing and installing → Chapter |
The brake caliper does not need to be removed in order to renew the protective cap; do not unbolt the break hose. |
12 - | Bleeder valve |
Apply thin coat of assembly paste G 052 150 A2 to thread before screwing in. |
10 Nm |
13 - | Dust cap |
Removing automatic distance control unit from and installing on retaining
plate, variant 2
Special tools and workshop equipment
required
Calliper square -VAS 6335-
Removing
–
Remove adaptive cruise control unit -J428-
→ Chapter.
& ...
Removing and installing bracket for roof grab handle
Note
Removal and installation is described for the left front
bracket for roof grab handle. Follow same instructions for the
remaining brackets for roof grab handle as appropriate.
Special tools and workshop equipment
requ ...
2-pack fine filler, flexible
Designation:
2-pack fine filler, flexible -LSP 787 100 A1-
Issued 07.2010
Product description
2-pack fine filler, flexible -LSP 787 100 A1- is a two-pack
filler with g ...